The MPO-500S series delivers 500W of output power and is fabricated on a compact 5 by 3 PC board. Three single output models feature a universal input, active PFC, 3k VAC isolation, tight line/load isolation and a 5V SB output. All models are approved to EN 60950. For more info go to:
The new MPV4080S series is a family of 40W DC/DC converters specifically designed for use in photovoltaic systems. They feature an ultra-wide input voltage range of 200 - 1500 VDC, 4k VAC isolation, high efficiency and operate over a range of -40 to +85°C. All models meet the requirements of EN 62109. For more info go to:
The IG275-xxE series provides asynchronous outputs of +15 & -8.0 VDC; the recommended gate bias levels for IGBT driver circuits. Three low cost models operate from input bus levels of 12, 15 or 24 VDC. Features include 81% efficiency, 3.0 kVAC I/O isolation and miniature SIP packaging. For more info go to:
The MPU-600CS is a family of EN 60950 approved, 600W AC/DC supplies packaged in a compact 8 x 6 x 1.6 inch U-Channel. Standard features include class B EMI; power factor correction; 3 kVAC isolation; & protection for over temp, over load, over voltage & short circuit faults. For more info go to:

Need a sample?   Call today at: 781-344-8226  or  EMail: mtravassos@micropowerdirect.com
The MPU-240S series is a family of compact, low profile 240W AC/DC power supplies. These economical supplies are approved to EN 60950. Standard features include active PFC, EMC/EMI to EN55022, 4 kVAC I/O isolation. A "Finger safe" cover & DIN rail mounting kit are also available. For more info go to:
The MPM-05MM series is a family of 5W AC/DC's packaged in a miniature 1 x 1 in case. Six standard models operate from a universal input, providing regulated outputs of 3.3, 5, 9, 12, 15, 24 or 48 VDC. Standard features include EN 55022 B EMI, 3 kVAC I/O isolation and EN 60950 approval. For more info go to:
The MCP-02x series is a family of 2W AC/DC power supplies that have a constant power mode output. Unlike conventional current limit designs these power supplies cannot be overloaded and can be shorted indefinitely. They are ideal for applications where typical designs require "oversizing" to avoid . For more info go to:
The MPM-40Mx series is a family of 40W AC/DC power supplies approved to EN 60601 and EN 60950. Standard features include EMC/EMI to EN55022 & EN 61000, reinforced insulation, and 4 kVAC rms I/O isolation. The MTBF is greater than 200 khours. Chassis mount & DIN Rail mount Available. For more info go to:

Need a sample?   Call today at: 781-344-8226  or  EMail: mtravassos@micropowerdirect.com

The MPU-120S series is a family of compact, 180W AC/DC power supplies. These economical supplies are approved to EN 60950. Standard features include active PFC, EMC/EMI to EN55022, 4 kVAC I/O isolation. A "Finger safe" cover & DIN rail mounting kit are also available. For more info go to:
The MPL-05SEUP series is a family of ultra-miniature, open SIP 5W AC/DC supplies. Standard features include tight line/load regulation, short circuit protection, and an I/O isolation of 3 k VAC. All models are approved to EN 60950. As part of our “Cost Cutter” product series, they are offered at very low cost. For more info go to:
The MDR-240 is a compact 240W DIN Rail AC/DC power supply. Standard features include active power factor correction, universal AC input, and EN 60950 approval. The MDR-240 is compatible with standard TS-35 DIN rails. Models are also available at 72W and 120W. For more info go to:
The MPM-01V series is a family of miniature, single output 1W AC/DC power supplies. Six models feature filtering to EN55022 B, 3 kVAC isolation, and tight line/load regulation. All models are protected for overload & short circuit faults and are approved to EN 60950. For more info go to:
The MD100xT series provides 90% of it's 1W output power rating at temperatures up to 105°C. Packaged in a compact 7-pin SIP (with an industry standard footprint, 18 models feature 1.5 kVDC isolation, continuous short circuit protection & single/dual outputs. A 3 kV isolation model is also available. For more info go to:
The MD600xRW series provides 6W of output power in an miniature SIP package. Thirty-Six models operate from wide 2:1 inputs providing single and dual outputs. Standard features include continuous short circuit protection, high efficiency and 1.5 kVDC isolation. The pin-out is industry standard. For more info go to:
The new MPV4060S series is a family of 40W DC/DC converters specifically designed for applications (such as photovoltaic equipment) that require an ultra-wide input voltage range. High performance features include a 6:1 input range (200 to 1200 VDC); high isolation, and high efficiency. For more info go to:
The MHI200DI5.7 is a family of miniature, high isolation 2W DC/DC converters designed to provide isolated power to high speed gate drive systems. They feature 5.7 VDC isolation & 15kv/µS CMTI. Forty standard models are offered. New MHI products are available from 1W to 40W. For more info go to:

Need a sample?   Call today at: 781-344-8226  or  EMail: mtravassos@micropowerdirect.com

The ML200SEI series is a family of miniature, low cost 2W SMT DC/DC converters. Standard features include 3 kVDC isolation, high efficiency, and continuous short circuit protection. As part of our "Cost Cutter" series they are offered at very low cost. All models are available on tape/reel. For more info go to:
The MI2500RU series, a family of compact 25W DC/DC converters in a 1 x 1 inch encapsulated case. Twelve models operate from a 4:1 input range, providing tightly regulated single and dual outputs. Standard features include a 1.5 kVDC isolation, tight regulation and efficiency to 90%. For more info go to:
The MR75-xxSRW series is a family of single output 75W converters designed to provide the wide input range, high isolation, rugged packaging and high reliability required for many railway/transit applications.
Eight standard models are packaged in a compact “Brick” case. For more info go to:
The MG200E series is a family of low cost, miniature 2W DC/DC converters. Twenty one single and dual output models offer standard features that include 1.5 kVDC isolation, high efficiency and low noise operation. All models are packaged in a miniature, Mini-DIP case. For more info go to:
The LDC-185 series is a family of compact 200W AC/DC LED drivers. specifically designed to operate in dry, wet and outside environments. They feature a constant current output; 3-way dimming; high efficiency, safety approvals and IP65/IP67 packaging. Other moodels are available. For more info go to:
The SRM7810 series are ultra-miniature, point of load switching regulators that provide up to 1A of output current. These units replace inefficient linear regulators (LM78xx type) for board level applications that require miniature size, high efficiency, high reliability and low cost. For more info go to:
The IGD962 is a hybrid integrated circuit specifically designed to drive N-channel IGBT modules. It provides the I/O isolation, high speed, drive voltage stability and fault protection required to control most MOS gated power devices. The pin out is compatible with M57962AL devices. For more info go to:
The LDF24E series is a family of low cost, DC/DC LED drivers. These units feature a constant current output; analog & PWM dimming; control and efficiency to 96%. As part of our “Cost Cutter” family of products they are offered at very low cost. All models are packaged in a miniature SMT package. For more info go to:

Need a sample?   Call today at: 781-344-8226  or  EMail: mtravassos@micropowerdirect.com